Epson EB-470, User Manual

Page: 124 / 165

Moving images are not displayed (only the moving image portion turns black)
Check Remedy
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen) Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
Projection stops automatically
Check Remedy
Is Sleep Mode set to On ? Press the [
t
] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off .
s
Extended - Operation - Sleep Mode p.103
The message "Not supported" is displayed
Check Remedy
Is the image signal format setting correct?
(Only when projecting images from a video source) Change the setting according to the signal for the connected equipment.
s
Signal - Video Signal p.99
Do the image signal resolution and refresh rate correspond to the
mode?
(Only when projecting computer images) See the documentation supplied with the computer for how to change the image signal resolution and refresh rate output
from the computer.
s
"Supported Monitor Displays" p.150
The message "No Signal" is displayed
Check Remedy
Are the cables connected correctly? Check that all the cables required for projection are securely connected.
s
"From Installation to Projection" p.39
Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel.
s
"Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.40
Problem Solving
124