Epson EB-4550, User Manual

Page: 85 / 156

Submenu Function
SSID Auto Set-
ting
If Connection Mode is set to Quick , when you set this to On , you
can search for the projector more quickly from among multiple
projectors. SSID is set automatically.
When connecting to multiple projectors from 1 computer in
Quick, set this to
Off , and set the same SSID in all the projectors
that will connect.
SSID Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters. (^
cannot be used. ) Set SSID to blank or ANY to establish an ANY
connection.
IP Settings DHCP
: You can set whether or not (
On
/
Off
) to use DHCP
g
.
If this is set to On , you cannot set any more addresses.
IP Address
: You can input the IP address
g
assigned to the
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Subnet Mask : You can input the Subnet Mask
g
for the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following subnet masks cannot be
used.
0.0.0.0, 255.255.255.255
Gateway Address
: You can input the IP address for the gateway
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following Gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display
To prevent the SSID from being displayed on the LAN Standby
screen, set this to
Off
.
IP Address Dis-
play
To prevent the IP address from being displayed on the LAN
Standby screen, set this to
Off .
Security menu
When the Wireless LAN unit is installed, it is strongly recommended that
you set security.
List of Functions
85