Epson EB-4550, User Manual

Page: 33 / 156

a
•
Make the following settings to output image and audio even when the projector is in standby mode.
Set
Standby Mode to Communication On .
s
Extended - Standby Mode p.78
Set A/V Output to Always On .
s
Extended - A/V Settings - A/V Output p.78
•
When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external
output.
Connecting a LAN Cable
Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
By connecting a computer to the projector over a network, you can project images and check the status of the projector.
LAN
The position of the LAN port differs depending on the model being used.
s
"Interface" p.9
a
To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Connecting Equipment
33