Epson EB-440W, User Manual

Page: 78 / 154

Extended Menu
Submenu Function
Display
You can make settings related to the projector's display.
Messages : You can set whether or not ( On / Off ) to display the Source name when you change the Source, the Color Mode name when you
change the Color Mode, a message when no image signal is input, and so on.
Display Background * 1 : You can set the screen status for when no image signal is available to Black , Blue , or Logo .
Startup Screen
* 1
: You can set whether or not ( On / Off ) to display the startup screen (the image projected when starting the projector) at
startup.
A/V Mute * 1 : You can set the screen displayed during A/V Mute to Black , Blue , or Logo .
User's Logo
*1 You can change the User's Logo that is displayed as a background during Display Background, A/V Mute, and so on.
s
p.69
Projection
Select from one of the following projection methods depending on how the projector is installed.
s
p.20
Front/Ceiling , Rear/Ceiling , and Front/Pointing Down
Operation
Direct Power On : You can set whether or not ( On / Off ) to enable Direct Power On.
When this is set to On and the power cable is plugged in, note that the projector turns on automatically in cases such as a power outage
being restored.
Sleep Mode : When set to On , this automatically stops projection when no image signal is being input and no operations are carried
out.
Sleep Mode Timer : When Sleep Mode is set to On , you can set the time before the projector automatically turns off within a range of 1 to
30 minutes in 1 minute increments.
High Altitude Mode : Set to On when using the projector above an altitude of 1500 m.
Audio Input : When set to Auto , audio is automatically output from any audio input source.
When set to Audio1 , Audio2 , or Audio (L/R) , audio is only output from the selected audio input source.
List of Functions
78