Epson EB-421i, User Manual

Page: 82 / 155

Sub-menu Function
Standby Setup
Make various settings for the status after the projector is
turned off.
Standby Mode : Set the type of standby status.
Set Energy Saving to reduce the amount of power used.Set
Networked Standby to monitor and control the projector
over a network.
s
"Monitoring and Controlling" p.128
Set to A/V Standby to perform the following operations.
•
Monitoring and controlling the projector over the
network.
s
"Monitoring and Controlling" p.128
•
Outputting analog RGB signals from the Computer1 port
to an external monitor.
•
Outputting audio from the microphone to the projector's
speaker.
(Only when the
Standby Microphone is set to On .)
s
"Connecting Image Sources" p.23
•
Outputting audio from the input port to an external
speaker.
(Only when
Standby Audio is set to On .)
Audio input from HDMI, USB Display, or LAN cannot
be output.
Also, audio is not output when
Audio Input is set to
Auto and the previous source that was being used is
HDMI, USB Display, USB, or LAN.
s
"Connecting Image Sources" p.23
•
Mixing audio from the microphone and the input port,
and outputting audio to an external speaker.
(Only when both
Standby Microphone and Standby
Audio are set to On .)
Sub-menu Function
s
"Connecting Image Sources" p.23
a
When turning the projector power on in
A/V standby mode, fan rotation may be
loud. This does not indicate that a problem
has occurred.
Standby Microphone : When set to On , you can output
audio from the microphone to the projector's speaker even
if the projector is in standby mode. (Only when
Standby
Mode is set to A/V Standby .)
Standby Audio : When set to On you can output audio
from the audio in port to an external speaker even if the
projector is in standby mode. (Only when
Standby Mode is
set to A/V Standby .)
USB Type B
Easy Interactive Function : Allows you to use the Easy
Interactive Function (PC Interactive). USB Display and
Wireless Mouse functions are not available.
USB Display/Easy Interactive Function : Allows you to use
the Easy Interactive Function (PC Interactive) and USB
Display. The Wireless Mouse function is not available.
Wireless Mouse/USB Display : Allows you to use the
Wireless Mouse function and USB Display. The Easy
Interactive Function (PC Interactive) is not available.
s
"Projecting with USB Display" p.33
s
"Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)" p.63
s
"Operating a Computer from the Projected Image"
p.54
Language
You can set the language for messages and menus.
List of Functions
82