Epson EB-421i, User Manual

Page: 105 / 155

Check Remedy
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source) Adjust the Color Saturation and Tint settings from the Configuration menu.
s
Image - Color Saturation , Tint p.76
Images appear dark
Check Remedy
Is the image brightness set correctly? Make Brightness and Power Consumption settings from the Configuration menu.
s
Image - Brightness p.76
s
Settings - Power Consumption p.79
Is the contrast
g
adjusted correctly? Adjust the
Contrast
setting from the Configuration menu.
s
Image
-
Contrast
p.76
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one.
s
"Replacing the Lamp" p.116
Problems when Projection Starts
The projector does not turn on
Check Remedy
Did you press the [
t
] button? Press the [
t
] button to turn the power on.
Are all of the indicators off? The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
Check the breaker and so on to ensure power is being supplied.
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
s
Epson Projector Contact List
Problem Solving
105