Epson EB-420 guide, User Manual

Page: 66 / 134

Sub-menu Function
Language
You can set the language for messages and menus.
Reset You can reset the adjustment values for Display
* 1
and
Operation
* 2
from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.75
* 1 When User's Logo Protect is set to On in Password Protect , settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off .
s
"Managing Users (Password Protect)" p.52
* 2 Except for High Altitude Mode.
Network Menu
When Network Protect is set to On in Password Protect , a message is
displayed and the network settings cannot be changed. Turn
Network
Protect Off and then configure the network.
s
"Setting Password Protect" p.52
Sub-menu Function
Net. Info. - Wire-
less LAN
Displays the following network setting status information.
•
Connection Mode
•
Antenna Level
•
Projector Name
•
SSID
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
•
Region Code
*
Net. Info. -
Wired LAN Displays the following network setting status information.
•
Projector Name
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
Network Config-
uration The following menus are available for setting network items.
Basic , Wireless LAN , Security , Wired LAN , Mail , Others ,
Reset , and Setup complete
* Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
s
Epson Projector Contact List
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s
"Changing Settings Using a Web Browser (Web Control)"
p.108
List of Functions
66