Epson EB-2040 User Manual Download Page 49

Page: 49 / 217

Image Shape

• If the yellow frame is still within the screen frame after

zooming in all the way, move the projector farther away from

the screen.

• For example, when you project onto a wide screen in a small

room and you cannot extend the yellow frame beyond the

screen frame, the yellow frame must include at least the top

and bottom two sides of the screen so that Screen Fit detects

the screen height and adjusts the image to fit the screen.

Press the [Screen Fit] button again.
After the adjustment screen appears, do not move the projector or

block the image. The projected image is corrected according to the

aspect ratio of the image being input and this message appears.

Fine-tune the image shape as necessary using the keystone adjustment

buttons on the control panel.
If no operations are performed, the message closes after about 7

seconds.

When you are finished, press [Esc].

The

Keystone

setting is now set to

Quick Corner

in the projector's

Settings

menu. If necessary, you can correct the image corners individually using

Quick Corner by pressing the arrow buttons on the control panel.

p.145

• "Correcting the Image Shape with Quick Corner"

p.51

Correcting the Image Shape with the Horizontal

Keystone Slider

You can use the projector's horizontal keystone slider to correct the shape of

an image that is an uneven horizontal rectangle, such as when the projector is

placed to the side of the projection area (EB-2140W/EB-2040).
You can make effective corrections when the projection angle is about 30º

right or left.

Turn on the projector and display an image.

Adjust the slider until the image is an even rectangle.

After correction, your image is slightly smaller.

• When you use the horizontal keystone slider, set

H-Keystone

Adjuster

in the projector's

Settings

menu.

Settings

Keystone

H/V-Keystone

H-Keystone

Adjuster

• You can also correct the shape of the image in the horizontal

direction in the projector's

Settings

menu.

Settings

Keystone

H/V-Keystone

p.145

Summary of Contents for EB-2040


























































































































































































































Search results

Summary of Contents for EB-2040

Reviews:

Related manuals for EB-2040

Brands by name

Popular brands

Epson EB-2040, User Manual

Search results

Summary of Contents for EB-2040

Reviews:

Related manuals for EB-2040

Brands by name

Popular brands