Epson EB-2040 User Manual Download Page 166

Page: 166 / 217

Copying Menu Settings Between Projectors (Batch Setup)

166

Connect the USB flash drive containing the saved batch setup file to the

projector's USB-A port.

Hold down the [Menu] button on the remote control or the control

panel and connect the power cord to the projector.

When all of the projector's indicators turn on, release the [Menu]

button.
When all of the indicators start flashing, the settings are being written.

When writing is finished, the projector turns off.

Caution

Do not disconnect the power cord or the USB flash drive from the projector

while the file is being written. If the power cord or drive is disconnected,

the projector may not start correctly.

Remove the USB flash drive.

Transferring Settings From a Computer

You can copy menu settings from one projector to another of the same model

by connecting the computer and projector with a USB cable.

You can use this batch setup method with the following operating

system versions:

• Windows Vista and later
• OS X 10.7.x and later

Disconnect the power cord from the projector, and check that all of the

projector's indicators have turned off.

Connect a USB cable to the computer's USB port and to the projector's

USB-B port.

Hold down the [Esc] button on the remote control or the control panel

and connect the power cord to the projector.

When all of the projector's indicators turn on, release the [Esc] button.
The computer recognizes the projector as a removable disk.

Open the removable disk icon or folder, and save the batch setup file to

the computer.

The file name for the batch setup file is PJCONFDATA.bin. If

you need to change the file name, add text after PJCONFDATA

using only alphanumeric characters. If you change the

PJCONFDATA section of the file name, the projector may not be

able to recognize the file correctly.

Eject the USB device (Windows) or drag the removable disk icon to the

Trash (OS X).

Disconnect the USB cable.
The projector turns off.

Disconnect the power cord from the projector to which you want to

copy settings, and check that all of the projector's indicators have

turned off.

Connect the USB cable to the computer's USB port and to the

projector's USB-B port.

Hold down the [Menu] button on the remote control or the control

panel and connect the power cord to the projector.

When all of the projector's indicators turn on, release the [Menu]

button.
The computer recognizes the projector as a removable disk.

Summary of Contents for EB-2040


























































































































































































































Search results

Summary of Contents for EB-2040

Reviews:

Related manuals for EB-2040

Brands by name

Popular brands

Epson EB-2040, User Manual

Search results

Summary of Contents for EB-2040

Reviews:

Related manuals for EB-2040

Brands by name

Popular brands