Network administrators can install SNMP (Simple Network Management
Protocol) software on network computers so they can monitor projectors. If
your network uses this software, you can set up the projector for SNMP
monitoring.
a
Press the [Menu] button on the control panel or remote control.
b
Select the
Network
menu and press [Enter].
c
Select
Network Configuration
and press [Enter].
d
Select the
Others
menu and press [Enter].
e
Set the
SNMP
setting to
On
.
f
Enter up to two IP addresses to receive SNMP notifications, using 0
to 255 for each address field.
a
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
g
When you have finished selecting settings, select
Complete
and
follow the on-screen instructions to save your settings and exit the
menus.
Related Links
•
"Monitoring and Controlling the Projector"
Setting Up Monitoring Using SNMP
121
Summary of Contents for EB-1970W
