Epson EB-1930, User Manual

Page: 32 / 146

Switching to the Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the remote control.
Remote control
A
Each time the button is pressed, it cycles through the images being input
from the following sources.
•
Computer1 port
•
Computer2 port
•
DisplayPort
B
Each time the button is pressed, it cycles through the images being input
from the following sources.
•
Video port
•
HDMI port
C
Each time the button is pressed, it cycles through the images being input
from the following sources.
•
USB Display
•
Images from the device connected to the USB(TypeA) port
D
Switches to the image from the network connected device.
Projecting with USB Display
You can use a USB cable to connect the projector to a computer to project
images from the computer.
You can project images and send audio with one USB cable.
System requirements
For Windows
OS
Windows 2000
* 1
Windows XP Professional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Windows Vista Ultimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
Windows 7 Ultimate 32/64 bit
Enterprise 32/64 bit
Professional 32/64 bit
Home Premium 32/64 bit
Home Basic 32 bit
Starter 32 bit
CPU
Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
Amount of Memory
256 MB or more
Recommended: 512 MB or more
Hard Disk
Space
20 MB or more
Projecting Images
32