Epson EB-1840W, User Manual

Page: 82 / 133

Submenu Function
Standby Mode
If you set Communication On , you can perform the
following operations even if the projector is in standby
mode.
•
Monitoring and controlling the projector over the network
(EB-1880 only)
s
"Monitoring and Controlling" p.63
•
Outputting analog RGB signals from the Computer1 port
to an external monitor (EB-1880/EB-1870/EB-1850W
only)
Language You can set the language for messages and menus.
Reset
You can reset the adjustment values for
Display
* 1 and
Operation
* 2 from the
Extended
menu to their default
settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.89
* 1 When User's Logo Protect is set to On in Password Protect , settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off .
s
"Managing Users (Password Protect)" p.59
* 2 Except for High Altitude Mode.
Network Menu (EB-1880 Only)
When Network Protect is set to On in Password Protect , a message is
displayed and the network settings cannot be changed. Turn Network
Protect Off and then configure the network.
s
"Setting Password Protect" p.59
Submenu Function
Net. Info. - Wired
LAN
Displays the following network setting status information.
•
Projector Name
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
Network Config‐
uration
The following menus are available for setting Network items.
Basic
,
Wired LAN
,
Mail
,
Others
, and
Reset
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s
"Changing Settings Using a Web Browser (Web Control) (EB-1880
only)" p.63
List of Functions
82