Epson EB-1750, User Manual, Page: 79 / 149

Wireless LAN menu
Submenu Function
Wireless LAN
Power
Turn On when connecting the projector to the computer over
wireless LAN.
If you do not want to connect via wireless LAN, turn it
Off to
prevent unauthorized access by others.
This is set to
On by default.
Connection
Mode
Set the connection mode when using EasyMP Network
Projection to connect the projector and computer.
This is set to
Quick by default.
See the following manual for details on connection mode.
s
EasyMP Network Projection Operation Guide
Channel
(This can only be set if Connection Mode is set to Quick .)
Select the frequency band used by the wireless LAN from 1ch ,
6ch , or 11ch .
This is set to 11ch by default.
Submenu Function
Wireless LAN
Sys.
Set the Wireless LAN system to either 802.11b/g or
802.11b/g/n .
This is set to 802.11b/g by default.
SSID Auto Set‐
ting Set to On to reduce the projector search time when connecting to
a network using Quick from Connection Mode .
Set to Off when connecting to multiple projectors at the same
time.
This is set to
On by default.
SSID Enter an SSID
g
. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
IP Settings
You can make network settings.
DHCP
: Set to
On
to make network settings using DHCP
g
. If this
is set to
On
, you cannot set any more addresses.
IP Address
: You can input the IP address
g
assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
: You can input the subnet mask
g
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address
: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display
To prevent the SSID
g
from being displayed on the LAN Standby
screen, set this to Off .
IP Address Dis‐
play
To prevent the IP address
g
from being displayed on the LAN
Standby screen, set this to Off .
List of Functions
79