Epson EB-1750, User Manual, Page: 37 / 149

W T
W T
W T
Adjusting the Image Position
Press the foot lever to extend and retract the front foot. You can adjust the
position of the image by tilting the projector up to 14 degrees.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
Adjusting the Horizontal Tilt
Extend and retract the rear feet to adjust the projector's horizontal tilt.
A
Extend the rear foot.
B
Retract the rear foot.
Correcting the Focus
You can correct the focus using one of the following methods.
•
Press the [Focus] button on the control panel or the remote control to
adjust the focus. (EB-1775W only)
Adjusting Projected Images
37