Epson EB-1750, User Manual, Page: 34 / 149

When the projector remains still for about two seconds after it detects
movement, it displays a screen for adjustment and then automatically
corrects the projected image.
a
•
Auto H/V-Keystone only works when Projection is set to Front
from the Configuration menu.
s
Extended - Projection p.74
•
If you do not want to use the Auto H/V-Keystone function, set Auto
H/V-Keystone to Off .
s
Settings - Keystone - H/V-Keystone - Auto H/V-Keystone
p.73
Correcting automatically - Auto V-Keystone - (EB-1770W/
EB-1760W/EB-1750 only)
When using EB-1770W/EB-1760W/EB-1750, only the vertical direction is
corrected automatically. If you need to correct the horizontal direction, use
manual H/V-Keystone.
Correcting manually - manual H/V-Keystone -
Manually correct distortion in the horizontal and vertical directions
independently. H/V-Keystone correction is ideal for fine-tuning keystone
distortion.
Correcting keystone distortion in vertical directions
Press the [ ][ ] buttons on the control panel.
Correcting keystone distortion in horizontal directions
Press the [ ][ ] buttons on the control panel.
a
You can set manual H/V-Keystone from the Configuration menu.
s
Settings - Keystone - H/V-Keystone p.73
Correcting manually - Quick Corner -
This allows you to manually correct each of the four corners of the
projected image separately.
Adjusting Projected Images
34