
Troubleshooting
93
f
Network settings are not restored after cutting the connection to the computer with EMP NS Connection.
Cannot connect because the keyword was wrong.
When connecting to a projector for which a projector keyword has been set, the wrong keyword is entered.
Check the keyword that is displayed on the projector's connection standby screen. After the connection is cut
off and then reconnected, enter the projector keyword on the keyword entry screen that is displayed.
Failed to acquire network adapter information.
Check the following point.
• Is a network adapter installed on the computer?
• Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see
.
One or more connected projectors do not support
resolutions greater than SXGA
g
. Reduce the screen
resolution and reconnect.
There is an ELP-735 projector in the connection destination. Change the computer's screen resolution to
SXGA (1280
^
1024) or less.
There are projectors that do not respond.
You cannot connect to multiple projectors simultaneously. Check the network settings on the computer and the
network settings on the projector.
For details on the network settings to be made on the projector, see
.
Enter the keyword displayed in the projector.
Check the projector's keyword displayed on the EasyMP standby screen, and enter the projector's keyword.
Check
Remedy
Are you manually connecting to a wireless LAN when
the computer starts up?
Try connecting to the wireless LAN manually.
Check
Remedy
Quick Connection Mode