Projector Network Settings - Network Menu
231
Setting
Options
Description
Notified IP Address IP address
Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Network Menu - Others Menu
Settings on the
Others
menu let you select other network settings.
s
Network
>
Network Configuration
>
Others
Setting
Options
Description
Secure HTTP
On
Off
To strengthen security, communication
between the projector and computer in
Web control is encrypted. When setting
security with Web control, it is
recommended to set this to
On
.
Setting
Options
Description
Web Server Cert.
—
Imports the Web server certificate for
secure HTTP.
Priority Gateway
Wired LAN
Wireless LAN
You can set the priority gateway.
AMX Device
Discovery
On
Off
Set to
On
when you want to allow the
projector to be detected by AMX Device
Discovery.
Crestron
RoomView
On
Off
Set to
On
only when monitoring or
controlling the projector over the
network using Crestron RoomView.
Enabling Crestron RoomView disables
the Epson Message Broadcasting feature
in the EasyMP Monitor software.
Control4 SDDP
On
Off
Set to
On
to allow device information to
be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
Message
Broadcasting
On
Off
Set to
On
to enable EPSON Message
Broadcasting feature.
You can download Message Broadcasting
and its Operation Guide from the
following Web site.
Network Menu - Reset Menu
Settings on the
Reset
menu let you reset all of the network settings.
Summary of Contents for EB-1440Ui
Page 1: ...User s Guide ...
Page 286: ...External Dimensions 286 With feet ...
