7.
Select
On
for
Wireless LAN Power
.
8.
Select
Advanced
for
Connection Mode
.
9.
Select other options as necessary for your network. See the
User's Guide
supplied with the projector
for more details.
10. Select security settings on the
Security
menu as necessary for your network. Check with your
network administrator for more information on making the correct settings.
11. When you have finished making settings, select
Setup Complete
or
Complete
, and follow the on-
screen instructions to save your settings and exit the menus.
Parent topic:
Related tasks
Connecting to the Projector from the Software over a Network System
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
To connect a computer to the projector using a wired LAN, you need to select network settings on the
computer and the projector.
1.
Contact your network administrator and check that DHCP is available under the current network
environment.
Note:
If DHCP is not available, write down the following values that are available for your projector.
• IP Address
• Subnet Mask
• Gateway Address
16
