Epson EasyMP EMP-735, Setup Manual, Page: 18 / 223

17
E
nglish
Once the wireless LAN card has been fully inserted in the card slot, the rear edge of
the card will protrude from the slot. When the card is properly seated, the
transmitter/receiver portion of the card protrudes from the slot.
Caution :
• Always remove the card before transporting the projector.
• Furthermore, when storing the projector in the included soft carrying case, be sure to
remove the card, and store the card in the carryall’s pocket.
Removal
Caution :
• Do not remove a PC card when the access lamp is lit green, when connected to a
network or when projecting a scenario. Improperly removing a PC card may result in
damage to the card or data destruction on a memory card.
• The PC card gets hot during and after projector use. Please handle the card carefully to
avoid personal injury or burns.
1 Press the eject button to the left of the card slot.
The eject button will pop out.
Eject button
Card slot
access lamp