Epson EasyMP EMP-1705, Operation Manual

Page: 77 / 100

77 Troubleshooting
If any of the following problems occur, refer to the pages given for
each problem.
Problems concerning EasyMP
f
Suddenly changes to the EasyMP screen
s
p.78
f
When a connection is made using EMP NS Connection, the
projected image remains as is, and a connection cannot be
made from another computer.
s
p.78
f
The projector is not found when EMP NS Connection is
started
s p.79
f Cannot connect in "Advanced Connection Mode" or wired
LAN connection
s
p.80
f
The Slideshow cannot be displayed on the desired display
when the multi-screen display function is being executed.
s p.80
f Applications are no longer displayed from the computer's
screen when the multi-screen display function is executed.
s
p.80
f
The mouse cursor is not displayed on the computer's
screen.
s
p.80
f
The image and sound for movies with EMP NS Connection
are not displayed, the image is slow to appear, or either the
video or audio stop
s
p.81
f
When a connection is made using EMP NS Connection, a
PowerPoint Slideshow cannot be started
s p.81
f When a connection has been made using EMP NS
Connection, the screen will not be refreshed when using an
Office application.
s p.81
f Cannot specify files with EMP SlideMaker2 s p.81
f Error message when starting up EMP NS Connection s p.82
f Error message when starting up EMP SlideMaker2 s p.83
Problems concerning watch and control by EMP
Monitor
f
Mail is not sent even if an
abnormality occurs in the
projector
s p.83
f Cannot control or monitor the
projector with EMP Monitor
s
p.84
f
Error message when starting up EMP Monitor
s
p.84