4.
Slide the edge guides to fit the edge of the plastic cards.
Note:
To scan plastic cards, set the appropriate setting in the Epson Scan 2 window. When you are using Document Capture
Pro, you can open the window by pressing the
Detailed Settings
button on the
Scan Settings
screen.
Select
Plastic Card (Landscape)
in
Document Size
or select
Off
in
Detect Double Feed
on the
Main Settings
tab in
Epson Scan 2. See the Epson Scan 2 help for details.
If
Detect Double Feed
in the Epson Scan 2 window is enabled and a double feed error occurs, remove the card from the
ADF, reload it, press the
d
button, and then select
DFDS Function
(Double Feed Detection Skip function) on the
control panel to set it to
On
. This disables
Detect Double Feed
for the next scan, and you can scan again. The
DFDS
Function
only disables
Detect Double Feed
for one sheet.
Related Information
&
“Required Settings for Special Originals in Epson Scan 2” on page 71
Laminated Cards
Specifications of Laminated Cards
The specification of laminated cards you can load into the scanner.
Size
Thickness
Loading Capacity
120.0×150.0 mm (4.7×5.9 in.) or less
0.8 mm (0.03 in.) or less
1 card
User's Guide
Specifications of Originals and Placing Originals
36
