38
You can lock the disc tray so that small children cannot interfere with it. The
disc lock allows you to lock the tray when a disc has been inserted.
With the power turned on (
is lit green) press and hold
on the main unit, then press
.
•
“TRAY LOCK” is displayed in the display window on the main unit,
and the disc tray is locked.
•
To cancel the disc tray lock, follow the same procedure.
“UNLOCKED” is displayed in the display window on the main unit,
and the disc tray becomes unlocked.
If a child turns the power on accidentally, and by some chance looks into the
lens when the lamp is on, the strong light could cause blurred vision and so on.
You can prevent such an accident by setting the child lock.
When the power supply is ON (
is lit green on the projector)
press and hold down
while holding down
on the
projector.
•
“CHILD LOCK” is displayed in the projector’s display window. Power
cannot be turned on unless the
button on the projector is held down
for about five seconds.
•
When the child lock is set,
becomes invalid. The disk tray does not
open when you press
.
•
You can turn on the power from the remote control as usual.
•
Use the same procedure to cancel the child lock. “UNLOCKED” is
displayed in the projector’s display window and the child lock is
released.
Tray lock
Child lock