Epson dreamio EH-R2000, User Manual

Page: 37 / 86

35
Configuration Menu Functions
Configuration M
e
n
u
List of configuration menus (EH-R4000)
When no image signals are being input, the "Image" menu and the "Signal" menu cannot be adjusted.
Also, the items displayed in the "Image" menu, the "Signal" menu and the "Info" menu will vary
depending on the type of image signals that are being projected.
Color Mode p.38
Brightness p.38
Contrast p.38
Color Saturation p.38
Tint p.38
Sharpness p.38
Advanced
Gamma
RGB
RGBCMY
Auto Iris p.39
Aspect p.39
Frame Interpolation p.40
Super-resolution p.40
Auto Setup
p.40
Advanced p.40
EPSON Super White
Overscan
HDMI Video Range
Abs. Color Temp. p.38
Skin Tone p.38
Reset p.39
Zoom Size p.39
Zoom Caption Pos. p.40
Tracking p.40
Sync. p.40
Position p.40
Progressive p.40
Setup Level
Noise Reduction
Dynamic, Living Room, Natural, Cinema,
("x.v.Color" is displayed when a signal is being input through the HDMI1/HDMI2 input terminals.)
Advanced p.38
Power Consumption p.39
Lens Iris p.39
Standard
Thin Line Enhancement, Thick Line Enhancement,
Horiz. Line Enhancement, Vert. Line Enhancement
2.0, 2.1, 2.2, 2.3, 2.4
Customized Adjust it from the image
Adjust it from the graph
R (Hue/Saturation/Brightness), G (Hue/
Saturation/Brightness),
B (Hue/Saturation/Brightness), C (Hue/
Saturation/Brightness),
M (Hue/Saturation/Brightness), Y (Hue/
Saturation/Brightness)
Reset
Offset R, G, B
Gain R, G, B
Off, Normal, High Speed
Normal, ECO
Yes, No
Auto, Normal, Full, Zoom, Wide, Anamorphic Wide, Horiz. Squeeze
Reset p.41
Yes, No
On, Off
Off, Low, Normal, High
Off, 1, 2, 3
On, Off
0%, 7.5%
Auto, Off, 2%, 4%, 6%, 8%
Auto, Normal, Expanded
Mosquito NR
Block NR
Video, Film, Auto
Not displayed when image signals are being input from a computer.
Image
Signa
l
Color Gamut
HDTV, EBU, SMPTE-C
Not displayed when image signals are being input from a computer.
Only displayed for Computer image input
Only displayed for component video or computer image signals from
[HDMI1]/[HDMI2] input.
Only displayed for component video image signals input.
(does not appear when signals from the [HDMI1]/[HDMI2] input
port are being input)
Off, 1, 2, 3
On, Off