14
Starting and Stopping Projection
Turning the power on and projecting images
TIP
If you set the "Direct Power On" to "On", the power of the unit will turn on when
the main power switch is turned on, without having to press the power button of
the remote control or the projector's control panel. p.42
If there is a problem with projection even though the projector is set up and connected correctly,
refer to p.15, 54.
The projector is equipped with the "Child Lock" function that prevents young
children from accidentally turning the power on and looking into the lens, and also
the "Control Panel Lock" function that prevents mis-operations is available. p.42
When using the projector at an altitude of about 1500m or above, make sure
you set the "High Altitude Mode" to "On". p.43
This projector is equipped with an automatic adjustment
function that automatically optimizes it when a computer
input signal is switched.
By setting "Standby Mode" to "On", you can turn the
projector on and off from a web browser on a networked
computer. (EH-R4000) p.42
If a laptop computer or a computer with a LCD screen
has been connected to the projector, you may need to
use keyboard or function settings to change the output
destination. While holding down the key, press
(the key with a symbol such as / on it). After the
selection is made, projection will soon start.
Computer's documentation
NEC
Panasonic
SOTEC
HP
Toshiba
IBM
LENOVO
SONY
DELL
Fujitsu
Macintosh
Example of output selection
Set mirror setting or
display detection.
Depending on OS, you can
change the output
selection by pressing .
ON
ON
Do not look into the
lens while projection
is in progress.
Remove the lens cover.
Connect the
power cable.
Turn on the main
power switch.
Turn the power on for the
connected equipment.
Turn the power on.
Control Panel
Remote Control
(commercially-
available)
(included)
Summary of Contents for dreamio EH-R2000
Page 1: ......
