11
Setting up
Installing the Pr
ojector
Projection methods
* When suspending the projector from a ceiling,
change the configuration menu settings. p.42
When projecting from a ceiling
* If you place the projector off to the side, aim it
straight ahead (rather than at the center of the
screen), then use the horizontal lens shift dial to
center the image on the screen.
Configuration menu
Settings
Projection
Front
Front/Ceiling
Projection methods
If you are installing the projector on the ceiling, this projector should be installed
by qualified technicians using only approved mounting equipment. If installation
work is not carried out correctly, the projector could fall down. This may result in
injury or accidents. Contact your dealer to carry out the installation work.
If you use a ceiling mount and apply adhesives to the mount to prevent the
screws from loosening, or if you use lubricants or oils on the projector, the
projector housing may crack and the projector may fall from its ceiling mount.
This could cause serious injury to anyone under the mount and could damage
the projector. When installing or adjusting a ceiling mount, do not use adhesives
to prevent the screws from loosening and do not use oils or lubricants.
When projecting from directly in front
When projecting from the side of
the screen
Do not use the projector in places where there is a lot of humidity or dust, near
cooking or heating appliances, or in places where it may come into contact with
smoke or steam. Do not use or store this projector outdoors for an extended length
of time. Fire or electric shock may result.
Clean the air filter at least once every three months.
Clean the air filter more frequently if using the projector in a dusty environment.
Do not use the projector on its side. This may cause malfunctions to occur.
Summary of Contents for dreamio EH-R2000
Page 1: ......
