4. After selecting the best pattern in the final set of alignment patterns, turn off the printer and exit
bidirectional adjustment mode.
Cancelling Printing
If you encounter problems while printing, you may need to cancel printing.
You can cancel printing from your computer by using the printer driver, or from the printer’s control
panel.
Using the printer driver
To cancel a print job before it is sent from your computer, see “Cancelling Printing” on page 83.
Using the printer’s control panel
Pressing
Cancel
button stops printing, clears the print job being received from the active interface,
and clears errors that may have occurred at the interface.
Printing a Self Test
Running the printer’s self test helps you determine whether the printer or the computer is causing the
problem:
❏
If the self test results are satisfactory, the printer is working properly and the problem is probably
caused by your printer driver settings, application settings, computer, or interface cable. (Be sure
to use a shielded interface cable.)
❏
If the self test does not print properly, there is a problem with the printer. See “Problems and
Solutions” on page 86 for possible causes and solutions to the problem.
You can print the self test using either single sheets or continuous paper. See “Loading Continuous
Paper” on page 38 or “Loading Single Sheets” on page 45 for paper loading instructions.
Note:
Use paper of at least the following width:
DLQ-3500II/DLQ-3500IIN User’s Guide
Troubleshooting
97
