❏
If EPSON Status Monitor 3 is installed with the Windows Firewall feature turned on
(recommended), the shared printer may not be able to be monitored. This problem can be resolved by
adding ENAGENT.EXE to Exceptions of the firewall function.
Installing EPSON Status Monitor 3
If you have not installed EPSON Status Monitor 3 yet, follow the steps below to install EPSON Status
Monitor 3.
1. Make sure that the printer is off and that Windows is running on your computer.
2. Insert the Software Disc in the CD-ROM drive.
Note:
Before proceeding, make sure you have installed the printer driver on your computer.
3. Follow the on-screen instructions to install the software.
You can also run the executable file that locates in the following.
Client’s OS
Folder Name
Windows XP/Vista/7/8/8.1/10 (x64)
\Apps\StatusMonitor\STM3x64
Windows XP/Vista/7/8/8.1/10 (x86)
\Apps\StatusMonitor\STM3
Setting up EPSON Status Monitor 3
Follow these steps to set up EPSON Status Monitor 3:
1. For Windows 10/Windows Server 2019/Windows Server 2016:
Click on the
Start
button, and then select
Windows System
>
Control Panel
>
View devices
and printers
in
Hardware and Sound
.
For Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012:
Click
Desktop
on the Start screen, move the cursor to the top-right corner of the screen, click
Settings
, and then click
Control Panel
. Next, click
View devices and printers
from the
Hardware and Sound
category.
For Windows 7/Windows Server 2008 R2:
Click
Start
, and click
Devices and Printers
.
DLQ-3500II/DLQ-3500IIN User’s Guide
Printer Software
67
