3. Select
Tractor
as the paper source on the home screen by pressing the
Paper Source
button.
The printer automatically advances the continuous paper from the standby position to the loading
position when it receives data.
Using the Micro Adjust Function
The Micro Adjust function allows you to move the paper forward or backward in 0.141 mm (1/180
inch) increments so that you can make precise adjustments to the top-of-form and tear off positions.
Adjusting the tear off position
If your paper perforation is not aligned with the tear off edge, you can use the Micro Adjust function to
move the perforation to the tear off position.
Follow these steps to adjust the tear off position:
!
Caution:
Never use the knob to adjust the tear off position; this may damage the printer or cause it to lose the
tear off position.
Note:
Your tear off position setting remains in effect until you change it, even if you turn off the printer.
1. Press the
OK
button when the finish printing screen is displayed after printing is complete or when
a screen is displayed after
Tear off
is selected on the home screen. The printer enters Micro Adjust
mode.
DLQ-3500II/DLQ-3500IIN User’s Guide
Paper Handling
53
