manualshive.com logo in svg

Epson DLQ-3500II, User Manual

Share
Download
Epson DLQ-3500II User Manual Download Page 52

Note:

If the auto tear off mode is turned on, the printer advances the paper perforation to the tear off
position automatically.

2. Tear off the printed pages.

!

Caution:

❏

Always tear off paper before feeding it backwards; feeding too many sheets backwards can
cause a paper jam.

❏

Never feed labels backward using the 

Load/Eject

 button, 

OK

 button, or knob on the right

side of the printer. Labels can easily peel off their backing and jam the printer. For
information on removing labels from the paper path, see “To tear off and eject labels” on
page 48.

3. Press the 

Load/Eject

 button to feed the continuous paper back to the standby position. The paper

is still attached to the tractor, but is no longer in the paper path.

4. Select 

Manual/CSF

 as the paper source on the home screen by pressing the 

Paper Source

 button.

Now you can load single sheets from the sheet guide. See “Loading Single Sheets” on page 45 for more
information.

Switching to continuous paper

Follow these steps to switch from single sheets to continuous paper:

1. If necessary, press the 

Load/Eject

 button to eject the last printed single sheet.

2. Make sure continuous paper is loaded in the printer as described in “Loading continuous paper

with the tractor” on page 38.

DLQ-3500II/DLQ-3500IIN     User’s Guide

Paper Handling     

52

Summary of Contents for DLQ-3500II




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands