manualshive.com logo in svg

Epson DLQ-3500II, User Manual

Share
Download
Epson DLQ-3500II User Manual Download Page 101

❏

Names and versions of the software applications you normally use with your product

Note:

Depending on the product, the dial list data for fax and/or network settings may be stored in the product’s
memory. Due to breakdown or repair of a product, data and/or settings may be lost. Epson shall not be
responsible for the loss of any data, for backing up or recovering data and/or settings even during a
warranty period. We recommend that you make your own backup data or take notes.

Help for Users in Europe

Check your Pan-European Warranty Document for information on how to contact Epson support.

Help for Users in Australia

Epson Australia wishes to provide you with a high level of customer service. In addition to your
product manuals, we provide the following sources for obtaining information:

Internet URL

http://www.epson.com.au

Access the Epson Australia World Wide Web pages. Worth taking your modem here for the
occasional surf! The site provides a download area for drivers, Epson contact points, new product
information and technical support (email).

Epson Helpdesk

Phone: 1300-361-054

Epson Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators
on the Helpdesk can aid you in installing, configuring and operating your Epson product. Our
Pre-sales Helpdesk staff can provide literature on new Epson products and advise where the nearest
dealer or service agent is located. Many types of queries are answered here.

We encourage you to have all the relevant information on hand when you ring. The more information
you prepare, the faster we can help solve the problem. This information includes your Epson product
manuals, type of computer, operating system, application programs, and any information you feel is
required.

DLQ-3500II/DLQ-3500IIN     User’s Guide

Where To Get Help     

101

Summary of Contents for DLQ-3500II




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands