Epson Disc Producer PP-50 User Manual Download Page 75

Page: 75 / 124

Replacing Ink Cartridges

Replacing an Ink Cartridge

Note:

❏

Do not open the ink cartridge package until you are ready to install it in the product.

❏

To confirm the status of each ink cartridge, see the following section:

See “Using EPSON Total Disc Monitor” on page 96.

This table describes the status of the lights and the actions you need to take.

: flashing

: on

To replace an ink cartridge, follow the steps below.

Caution:

Do not remove the cartridge from the product until you are ready to replace it with another.

Note:

The illustrations show replacement of the light magenta ink cartridge, but the instructions are the
same for all the cartridges.

1. Make sure that the

Power light is on, but not flashing.

2. Open the ink cartridge cover.

Note:

Wait for 4 seconds or more before removing the ink cartridge. Otherwise, ink may squirt.

Lights

Action

Ink is low. Obtain a replacement ink cartridge.

The ink cartridge has reached its replacement time. Replace the
used ink cartridge with a new one.

Summary of Contents for Disc Producer PP-50





























































































































Search results

Summary of Contents for Disc Producer PP-50

Reviews:

Related manuals for Disc Producer PP-50

Brands by name

Popular brands

Epson Disc Producer PP-50, User Manual

Search results

Summary of Contents for Disc Producer PP-50

Reviews:

Related manuals for Disc Producer PP-50

Brands by name

Popular brands