Epson DFX 8000, User Manual

Page: 309 / 346

IBM Emulation Mode Commands Arranged by Topic
Format:
Print One Character from Symbol Set
ASCII code:
Decimal:
Hexadecimal:
Comments:
Prints a single character from the symbol set. See the
Appendix for the symbol set and the codes to use for
Format:
Define User-defined Characters
ASCII code:
Decimal:
Hexadecimal:
Comments:
.
.
.
If is the total number of characters to be defined,
2
in all cases
the of first to be defined
0
if the top 8 pins are used; for the bottom 8
The values through are the data numbers that define the
characters, with data numbers for each character.
You determine the data numbers for each character
as
shown on
first grid for
Epson in
on
characters
To
print
a you
need
to use the I command, which described on
9-50 c o m m a n d s u m m a r y