Software Installation Guide
21
Installing and Starting the Software
Before you install EpsonNet WebManager, make sure TCP/IP is
installed, and the IP address or host name for the computer is set.
Register the host name in the hosts file in the Windows folder.
Then follow these steps to install EpsonNet WebManager:
1. Insert the CD-ROM in your drive. You see the EPSON
Installation Program window.
2. Double-click
Install EpsonNet WebManager
, then follow
the instructions on the screen to install the program.
Make sure that anyone who needs to use EpsonNet
WebManager knows the IP address or host name of the server.
3. To open EpsonNet WebManager from the server computer
where it is installed, simply run the program from the Start
menu.
To open EpsonNet WebManager from a client computer,
open a browser and enter the IP address (or host name) of the
server and the port number (8090) as follows:
http:// the IP address or host name of the server:8090/
for example:
http://192.168.100.201:8090/
Starthere.book Page 21 Thursday, September 11, 2003 2:55 PM
