background image

The EpsonNet Configuration Utility      

10-27

NetBEUI

IPP

You must make the following settings before setting up the 
printer for Internet Printing in Windows 2000 or using EpsonNet 
Internet Print in Windows 98/95/NT 4.0. See Chapter 13 for more 
information about EpsonNet Internet Print.

Items

Explanations

NetBEUI

Enable or Disable NetBEUI. 

NetBIOS  Name

Enter the printer’s NetBIOS name which is the computer 
name on the network (up to 15 characters). Be sure to 
give a name that is unique on the network.

Workgroup Name

Enter the workgroup name or domain name (up to 15 
characters).

Device Name

Enter the device name (up to 12 characters). LPT1, 
LPT2, or LPT3, or COM cannot be used.

SUBMIT button

Saves any changes.

Items

Explanations

IPP URL

Displays the printer’s URL for Internet Printing.

Format:

 http:// the IP address of the printer:631/ the 

printer name set below

Example:

 http://192.168.100.201:631/

EPSON_IPP_Printer

Printer Name

Enter the printer name to use for Internet Printing (up to 
127 characters).

Example:

 EPSON_IPP_Printer

Location

Enter the name of the printer’s physical location (up to 
64 characters).

SUBMIT button

Saves any changes.

Summary of Contents for C82378

























































































































































































































































































Reviews: