49
Your printout is faint or has gaps in
the image . . .
■
Make sure the print head nozzles are
not clogged. To clean the print
head, see page 27.
■
Make sure the ink cartridges aren’t
low on ink. To replace an ink
cartridge, see page 31.
■
Make sure the
Media Type
setting
matches the paper you’re using.
■
Make sure your paper isn’t
damaged, old, dirty, or loaded face
down. If it is, reload a new stack of
paper with the printable side up.
The printable surface is usually
whiter or shinier.
Your printout contains incorrect or
missing colors . . .
■
Make sure the Ink setting is set to
Color
for color images.
■
Make sure the print head nozzles are
not clogged. To clean the print
head, see page 27.
■
Make sure the ink cartridges aren’t
low on ink or too old. If either ink
out light is flashing, replace the ink
cartridge; see page 31. If your ink
cartridge is more than six months
old, you may need to replace it; see
page 34.
■
If you are printing a high-
resolution image, try turning
off PhotoEnhance.
■
Try using Automatic mode. See
page 14 for instructions.
■
Your printed colors can never
exactly match your on-screen colors.
However, you can use a color
management system to get as close
as possible. For information on your
printer software’s color matching
options, see your electronic
EPSON
Stylus COLOR 660 Reference Guide
.
basics.book Page 49 Thursday, September 23, 1999 10:42 AM