4
System Requirements
To use your printer and its software, your system should have:
■
An IBM
®
compatible PC with at least a 486/66 MHz (for Windows
®
98) or
486/25 MHz (for Windows 95 or Windows NT
®
4.0) processor (Pentium
®
processor recommended)
■
Microsoft
®
Windows 95, Windows 98, or Windows NT 4.0
■
At least 16MB of RAM (32MB for Windows 95 or 98, or 64MB for
Windows NT 4.0 recommended)
■
At least 50MB of free hard disk space (100MB recommended)
■
VGA, Super VGA, or better display adapter and monitor
■
Double-speed (2
x
) CD-ROM drive (quad-speed [4
x
] or faster recommended) for
installing the printer software
■
A high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet
long); the cable must have a D-SUB, 25-pin, male connector for your computer
and a 36-pin, Centronics
®
compatible connector for the printer
If you want to use your EPSON Stylus COLOR 660 with Windows 98 USB or a
Macintosh
®
with a built-in USB port, an optional USB/Parallel Adapter kit is
available. You can purchase the kit from EPSON Accessories at (800) 873-7766 or
visit our website at www.epsonsupplies.com (U.S. sales only). In Canada, please call
(800) 873-7766 for dealer referral
.
The Macintosh printer driver and EPSON USB
Printer Device and Windows 98 USB drivers are included on the CD-ROM that
comes with your printer.
E
NERGY
S
TAR
Compliance
As an E
NERGY
S
TAR
Partner, EPSON has determined that
this product meets the E
NERGY
S
TAR
guidelines for energy
efficiency. The EPA E
NERGY
S
TAR
office equipment
program is a voluntary partnership with the computer and
office equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax machines,
and copiers in an effort to reduce air pollution caused by power generation.
basics.book Page 4 Thursday, September 23, 1999 10:42 AM