Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) User Manual Download Page 52

Page: 52 / 266

How to Set Up the Print Server

R4CB110
User’s Guide

Rev.C

Start.fm

A5 size

8/21/03

Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee

❏

If the Dynamic DNS function is not supported, we recommend
that you select

Manual

and enter an IP address. This is because

if you select

Automatic

, the IP address of the print server

changes every time you turn on the printer so that you need to
change the printer port setting accordingly.

5. If you want to get a private address between 169.254.1.1 and

169.254.254.254 automatically when an IP address cannot be
obtained by the DHCP server, leave the

Set using Automatic

Private IP Addressing (APIPA)

check box selected; otherwise,

clear the check box.

6. When setting an IP address using the ping command, select

the

Set using PING

check box. Do not select when setting an

IP address with EpsonNet WinAssist/MacAssist/WebAssist;
this prevents any unexpected change of the IP address.

Note:

Be sure not to select the check box when not using ping; this prevents
an unexpected change of the IP address by EpsonNet WebManager.

7. To assign an IP address manually, enter the IP address, the

subnet mask, and the default gateway. Be sure the IP address
does not conflict with any other devices on the network.

Note:

If there is a server or a router functioning as a gateway, enter the IP
address of the server or the router for the gateway address. If there
is no gateway, leave the default values there.

8. Click the

Extended Settings

button if you want to make

extended settings, such as Dynamic DNS and Universal Plug
and Play functions.

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)











































































































































































































































































Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands

Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server), User Manual

Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands