Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) User Manual Download Page 253

Page: 253 / 266

Tips for Administrator

241

R4CB110
User’s Guide

Rev.C

TIPS.fm

A5 size

8/21/03

Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee

Appendix A

Tips for Administrator

Selecting a Printing Method

If necessary, use this section to help you select a printing method.

Printing from Windows

Check if there is a Windows XP/Server 2003/2000/NT print
server on your network, and then use the suggestions below.

Note:

Only the recommended printing methods are introduced here. See
“Features of the Printing Methods” on page 242 for information on
additional methods.

If no Windows XP/Server 2003/2000/NT print server exists

Use a printing method appropriate to your operating system:

❏

For Windows Me/98/95
We recommend TCP/IP printing via EpsonNet Direct Print.
See “About EpsonNet Direct Print” on page 173.

❏

For Windows XP/Server 2003/2000/NT
We recommend TCP/IP printing via LPR. See “Windows XP”
on page 10 4, “Windows Server 2003” on page 110 , “Windows
2000” on page 118, or “Windows NT 4.0” on page 124.

If a Windows XP/Server 2003/2000/NT print server exists

On the server, set the printer to connect with LPR and turn it into
a shared printer. Your clients can then print to this shared printer.

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)











































































































































































































































































Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands

Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server), User Manual

Search results

Summary of Contents for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Reviews:

Related manuals for C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server)

Brands by name

Popular brands