Epson C11CK62201 User Manual Download Page 216

Page: 216 / 330

216

Replacing the Maintenance Box

Make sure you have a new maintenance box before you begin.

Caution:

Do not reuse a maintenance box that has been removed and left uninstalled for more than a

week. Keep the maintenance box away from direct sunlight.

Note:

You cannot print or clean the print head while the maintenance box is full, but you can perform

tasks that do not require ink, such as scanning.

Note:

Do not drop the maintenance box or subject it to strong shocks and do not store it in high or

freezing temperatures.

Make sure the product is not printing.

Remove the new maintenance box from its package.

Caution:

Do not touch the green chip on the maintenance box.

Use a flat-head screwdriver to loosen the screw on the maintenance box cover as shown, then
remove the cover.

Summary of Contents for C11CK62201











































































































































































































































































































































Search results

Summary of Contents for C11CK62201

Reviews:

Related manuals for C11CK62201

Brands by name

Popular brands

Epson C11CK62201, User Manual

Search results

Summary of Contents for C11CK62201

Reviews:

Related manuals for C11CK62201

Brands by name

Popular brands