manualshive.com logo in svg

Epson C11CJ81201, User Manual

Share
Download
Epson C11CJ81201 User Manual Download Page 65

2. Click 

Turn Windows Firewall on or off

 in the window on the left. Make sure that 

Block all

incoming connections, including those in the list of allowed apps

 is not selected, and

then click 

OK

.

3. Click 

Allow an app or feature through Windows Firewall

 in the window on the left.

4. Select 

File and Printer Sharing

, and then click 

OK

.

Setting for the clients

This section describes how to install the printer driver by accessing the shared printer on a
network.

Note:

❏

To share the printer on a Windows network, you need to set the printer server. For details, see
“Setting up your printer as a shared printer” on page 63.

❏

This section describes how to access the shared printer on a standard network system using the
server (Microsoft workgroup). If you cannot access the shared printer due to the network system,
ask the administrator of the network for assistance.

❏

This section describes how to install the printer driver by accessing the shared printer from the
Printers folder. You can also access the shared printer from Network Neighborhood or My Network
on the Windows desktop.

❏

When you want to use the EPSON Status Monitor 3 at clients, you have to install both of the
printer driver and the EPSON Status Monitor 3 in each client.

❏

If the printer drivers are not already installed on the client, please install them before performing
these settings.

1. Click on the 

Start

 button, and then select 

Windows System

 > 

Control Panel

 > 

View devices

and printers

 in 

Hardware and Sound

.

LQ-780/LQ-780N     User’s Guide

Printer Software     

65

Summary of Contents for C11CJ81201































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands