manualshive.com logo in svg

Epson C11CJ81201, User Manual

Share
Download
Epson C11CJ81201 User Manual Download Page 56

Note:

❏

If you are using a computer running with different OS by multiple users are logged on, a
communication error message may be displayed when monitoring printers at the same time.

❏

Although you can print to the printer directly connected to the computer in a remote location by
using Remote Desktop function, communication error may occur.

❏

If EPSON Status Monitor 3 is installed with the Windows Firewall feature turned on
(recommended), the shared printer may not be able to be monitored. This problem can be resolved
by adding ENAGENT.EXE to Exceptions of the firewall function.

Installing EPSON Status Monitor 3

If you have not installed EPSON Status Monitor 3 yet, follow the steps below to install EPSON
Status Monitor 3.

1. Make sure that the printer is off and that Windows is running on your computer.

2. Insert the Software Disc in the CD-ROM drive.

Note:

Before proceeding, make sure you have installed the printer driver on your computer.

3. Follow the on-screen instructions to install the software.

You can also run the executable file that locates in the following.

Client’s OS

Folder Name

Windows XP/Vista/7/8/8.1/10 (x64)/11

\Apps\StatusMonitor\STM3x64

Windows XP/Vista/7/8/8.1/10 (x86)

\Apps\StatusMonitor\STM3

Setting up EPSON Status Monitor 3

Follow these steps to set up EPSON Status Monitor 3:

1. Click on the 

Start

 button, and then select 

Windows System

 > 

Control Panel

 > 

View devices

and printers

 in 

Hardware and Sound

.

2. Right-click your printer icon, then click 

Printer properties

, and then click the 

Utility

 tab.

LQ-780/LQ-780N     User’s Guide

Printer Software     

56

Summary of Contents for C11CJ81201































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands