Epson C11CH71202, User Manual

Page: 156 / 350

156
3. Select Add Entry .
4. Select Add Contact .
5. Do one of the following:
• To create a contact for scanning to fax, select Fax .
• To create a contact for scanning to email, select Email .
• To create a location for scanning to a network folder or FTP, select Network Folder/FTP .
6. Select the number you want to use for the contact you are adding.
7. Select the Name field. Use the on-screen keyboard to enter the contact name (up to 30 characters)
and select OK .
8. Select the Index Word field. Use the on-screen keyboard to enter a word to use when searching for
an entry (up to 30 characters) and select OK . (This field is optional.)
9. Do one of the following:
• For a fax contact, select the Enter Fax Number field. Use the displayed keyboard to enter the fax
number and select OK .
Select any other fax settings as necessary.
• For an email contact, select the Enter Email Address field. Use the on-screen keyboard to enter
the address and select OK .
• For a network folder or FTP location, select the Communication Mode field and select an option.
Then select the Enter Location field, use the on-screen keyboard to enter the location, and select
OK . Enter other information if necessary.
Enter the folder path name for the location setting in one of the following formats depending on the
Communication Mode setting you selected:
• SMB : \\host name\folder
• FTP : ftp://host name/folder name
10. Select OK .
Note: If you need to edit or delete scanning contacts, the procedures are the same as for fax contacts.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Scanning to a Network Folder or FTP Server
You can scan an image and save it to a network folder using your product's control panel. You can either
enter the folder path directly on the product's control panel or select a folder from the
Destination tab.