Epson C11CH68401, User Manual

Page: 234 / 371

5.
Select the SSID for the wireless router.
Note:
❏
If the SSID you want to connect to is not displayed on the printer's control panel, tap Search Again to update the list.
If it is still not displayed, tap Enter Manually , and then enter the SSID directly.
❏
If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If
you are using the wireless router with its default settings, use the SSID on the label. If you cannot find any
information, see the documentation provided with the wireless router.
6.
Tap
Enter Password
, and then enter the password.
Note:
❏
The password is case-sensitive.
❏
If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
7.
When you have finished, tap OK .
8.
Check the settings, and then tap Start Setup .
9.
Tap OK to finish.
Note:
If you fail to connect, load A4 size plain paper, and then select Print Check Report to print a connection report.
10. Close the
Network Connection Settings
screen.
Related Information
&
“Entering Characters” on page 27
&
“Making Wi-Fi Settings by Entering the SSID and Password” on page 233
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless routor. If the following
conditions are met, you can set up by using this method.
❏
The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏
The current Wi-Fi connection was established by pressing a button on the wireless router.
1.
Tap on the home screen.
2.
Select Wi-Fi (Recommended) .
If the printer has already been connected by Ethernet, select Router .
3.
Tap Start Setup .
If the network connection is already set up, the connection details are displayed. Tap
Change Settings
to
change the settings.
If the printer has already been connected by Ethernet, tap Change to Wi-Fi connection. , and then select Yes
after checking the message.
Adding or Replacing the Computer or Devices
>
Re-setting the Network Connection
>
Making Wi-
…
234