Epson C11CG92201 User Manual Download Page 278

Page: 278 / 328

278

8. Close the ADF cover until it clicks into place.

9. Reload your originals.

Caution:

Do not load the ADF beyond its capacity for your paper size. Also make sure your originals

are not bent, folded, or curled and do not have tape, staples, or other materials that could obstruct the
feeder.

10. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam

message, check the other paper jam solutions.

Parent topic:

Solving Paper Problems

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:

• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.

Select the correct paper size when you reprint.

• If paper falls from the output tray, extend the paper stopper.

• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select

the correct paper type setting when you reprint.

Parent topic:

Solving Paper Problems

Related references

Paper Jam Problems Inside the Product

Summary of Contents for C11CG92201









































































































































































































































































































































Search results

Summary of Contents for C11CG92201

Reviews:

Epson C11CG92201, User Manual, Page: 278 / 328

Search results

Summary of Contents for C11CG92201

Reviews: