171
If the Select Dial Tone Detection screen appears, select
Disable
. However, disabling the dial tone
detection function may drop the first digit of a fax number and send the fax to the wrong number.
Parent topic:
Related tasks
Entering Characters on the LCD Screen
Selecting the Line Type
If you connect the product to a PBX phone system or terminal adapter, you must change the product's
line type. PBX (Private Branch Exchange) is used in office environments where an external access code
such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched
Telephone Network), which is a standard home phone line.
1.
Press the
home button, if necessary.
2.
Select
Settings
>
General Settings
>
Fax Settings
>
Basic Settings
>
Line Type
>
PBX
.
You see a screen like this:
3.
Select Access Code and select
Use
.
4.
Select the Access Code field and use the displayed keypad to enter the access code, such as 9.
Then select
OK
.
5.
Select
OK
to exit.
Parent topic:
Related tasks
Summary of Contents for C11CG36201
