PictureMate PM 260 / PM 290
Preparing to Print
17
Englis
h
1.
Make sure the edge guides are slid to the sides.
2.
Place your paper in the center, with the glossy side
up.
Note:
Make sure paper is glossy side up to prevent
smearing.
3.
Slide the edge guides against the paper. Make
sure they are snug, but not so tight that paper
cannot move.
Note:
❏
You can load paper up to 20 sheets.
❏
When you need more paper, order a PictureMate
PicturePack. See “PicturePack , Paper, and
Options” on page 60 for more information.
Paper Handling Instructions
When storing printouts
❏
Do not touch the printed side or stack your
printouts until the ink is dry.
❏
To avoid scratching the image, be sure not to rub
the printed side of the paper. If the printed side is
rubbed too strongly, ink may come off the paper.
❏
Do not stack printouts with the image sides
touching.
❏
Do not stack printouts and conventional film
photographs with the image sides touching.
❏
If you stack printouts, place a sheet of plain paper
or other absorbent paper between the individual
prints.
Edge guides
Glossy side
