108
Problem Solving
Paper loading or feeding problems
The printer does not load continuous paper or does not feed it
properly.
Cause
What to do
Continuous paper is not
loaded properly.
See “Loading Paper Onto the Front
Tractor” on page 15 or “Loading Paper
Onto the Rear Tractor” on page 22 for
instructions on loading continuous
paper with the tractor you want to use.
The wrong tractor may be
selected.
Check if the correct tractor arrow is lit
on the Tractor Select indicator.
If the wrong tractor is selected, be sure
paper is loaded to the standby position
on the tractor you want to use. Then
press the
Front/Rear
button to switch to
that tractor.
The printer may be out of
paper.
Load paper onto the tractor. The tractor
arrow on the Tractor Select indicator
should be green.
The printer does not feed continuous paper to the standby
position.
Cause
What to do
You have not torn off the
printed pages before pressing
the
LF/FF Load
button.
Tear off the printed pages at the
perforation. Then press the
LF/FF Load
button to feed the paper backward to the
standby position.
