Epson BrightLink 710Ui User Manual Download Page 47

Page: 47 / 309

Connect the other end to the projector's

Video

port.

Parent topic:

Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports.
If you are projecting video using the

Video

Computer

port, connect the projector to the video source

using an optional stereo mini-jack audio cable.

Note:

If you connected your video source to the projector using an HDMI cable, the audio signal is

transferred with the video signal; you do not need an additional cable for sound.

Connect the audio cable to your video source's audio-out ports.

Summary of Contents for BrightLink 710Ui






















































































































































































































































































































Search results

Summary of Contents for BrightLink 710Ui

Reviews:

Epson BrightLink 710Ui, User Manual, Page: 47 / 309

Search results

Summary of Contents for BrightLink 710Ui

Reviews: