
289
Power consumption
(100 to 120 V)
Operating:
Normal Power Consumption mode: 448 W
Extended or Quiet Power Consumption mode: 348 W
Standby:
0.3 W (Communication Off), 2.0 W (Communication On)
Power consumption
(220 to 240 V)
Operating:
Normal Power Consumption mode: 423 W
Extended or Quiet Power Consumption mode: 332 W
Standby:
0.3 W (Communication Off), 2.0 W (Communication On)
Parent topic:
Projector Environmental Specifications
Temperature
Operating - Single projector:
32 to 113 °F (0 to 45 °C)
Operating - Multiple projectors:
32 to 104 °F (0 to 40 °C)
Storage:
14 to 140 °F (–10 to 60 °C)
Humidity
(relative, non-
condensing)
Operating: 20 to 80%
Storage: 10 to 90%
Operating altitude
Up to 4921 feet (1500 m)
Up to 9842 ft (3000 m) with High Altitude Mode enabled
Parent topic:
Summary of Contents for BrightLink 710Ui
