Home
/
Epson
/
BrightLink 710Ui
/
User Manual

Epson BrightLink 710Ui, User Manual, Page: 159 / 309

Share

Page: 159 / 309

Epson BrightLink 710Ui User Manual Download Page 159

159

2.

Insert the flash drive into the

USB-A

port.

Note:

Connect the flash drive directly to the projector. Do not use a hub or your settings may not be

saved correctly.

3.

Press and hold the

Esc

button on the control panel or remote control as you connect the power cord

to the projector's power inlet.

4.

When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release
the

Esc

button.

The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the On/Standby light turns blue and the projector enters standby mode.

Caution:

Do not unplug the power cord or remove the flash drive while the lights are flashing. This

could damage the projector.

5.

Once the projector enters standby mode, remove the flash drive.

Parent topic:

Copying Menu Settings Between Projectors

Transferring Settings from a USB Flash Drive

After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.

«
...
157
158
159
160
161
...
»

Summary of Contents for BrightLink 710Ui






















































































































































































































































































































Reviews:

No comments